GB/T 13342-1992 船用往复式液压缸通用技术条件

作者:标准资料网 时间:2024-05-16 19:49:18   浏览:8598   来源:标准资料网
下载地址: 点击此处下载
基本信息
标准名称:船用往复式液压缸通用技术条件
英文名称:General specification of reciprocating hydraulic cylinder for ship
中标分类: 船舶 >> 船舶管路附件 >> 船用液压、气动元件及附件
ICS分类: 造船和海上建筑物 >> 船舶和海上建筑物综合 >> 船用发动机和推进系统
替代情况:替代CB 1013-1982;被GB/T 13342-2007代替
发布部门:国家技术监督局
发布日期:1992-01-05
实施日期:1992-10-01
首发日期:1992-01-05
作废日期:2008-01-01
主管部门:中国船舶工业集团公司
归口单位:全国船用机械标准化技术委员会
起草单位:中船公司603所
出版社:中国标准出版社
出版日期:1900-01-01
页数:8页
适用范围

本标准规定了船用往复式液压缸技术要求、试验方法、检验规则、标志和包装。本标准适应于以矿物基液压油为介质的船用往复式液压缸。其他型式的船用液压缸也可参照使用。

前言

没有内容

目录

没有内容

引用标准

没有内容

所属分类: 船舶 船舶管路附件 船用液压 气动元件及附件 造船和海上建筑物 船舶和海上建筑物综合 船用发动机和推进系统
下载地址: 点击此处下载
【英文标准名称】:Methodsforpreparationofcalibrationgasmixtures.Dynamicvolumetricmethods.Periodicinjectionsintoaflowinggasstream
【原文标准名称】:标定混合气体的制备方法.第5部分:动态容积法.第3节:流动气流的周期性注入
【标准号】:BS4559Sec.5.3-1987
【标准状态】:作废
【国别】:英国
【发布日期】:1987-12-31
【实施或试行日期】:
【发布单位】:英国标准学会(BSI)
【起草单位】:
【标准类型】:()
【标准水平】:()
【中文主题词】:气体分析;周期性;气体;混合物;浓度(化学);混合;控制样品;试样制备;试验设备;流量率;误差;误差分析;校正
【英文主题词】:specimenpreparation;flowrates;calibration;errors;gasanalysis;gases;periodicity;concentration(chemical);controlsamples;erroranalysis;mixtures;mixing;testequipment
【摘要】:
【中国标准分类号】:G04
【国际标准分类号】:
【页数】:12P;A4
【正文语种】:英语


【英文标准名称】:Plasticspipingsystemsforpressureandnon-pressurewatersupply-Glass-reinforcedthermosettingplastics(GRP)systemsbasedonunsaturatedpolyester(UP)resin
【原文标准名称】:压力和无压力给水塑料管道系统.基于不饱和聚酯树脂的玻璃增强热固性塑料(GRP)系统
【标准号】:ISO10639-2004
【标准状态】:现行
【国别】:国际
【发布日期】:2004-02
【实施或试行日期】:
【发布单位】:国际标准化组织(IX-ISO)
【起草单位】:ISO/TC138
【标准类型】:()
【标准水平】:()
【中文主题词】:不饱和聚酯;聚酯树脂;压力管;塑料;塑料管道;水管;管系统;玻璃纤维增强的;试验;材料;热固性聚合物;水常规;管道;不饱和的;规范(验收);玻璃纤维增强塑料;塑料管;管;定义;管连接件;给水;配件;分类
【英文主题词】:Classification;Definitions;Fittings;Glass-fibrereinforced;Glass-fibrereinforcedplastics;Materials;Pipecouplings;Pipelines;Pipes;Pipingsystem;Plasticpipelines;Plasticpipes;Plastics;Polyesterresins;Pressurepipes;Specification(approval);Testing;Thermosettingpolymers;Unsaturated;Unsaturatedpolyesters;Waterpipes;Waterpractice;Watersupply
【摘要】:ThisInternationalStandardspecifiesthepropertiesofpipingsystemcomponentsmadefromglass-reinforcedthermosettingplastics(GRP)basedonunsaturatedpolyesterresin(UP)forwatersupplywithorwithoutpressure,aswellasthepropertiesofthesystemitself.ThisInternationalStandardisapplicabletoGRP-UPpipingsystems,withflexibleorrigidjointswithorwithoutendthrustload-bearingcapability,primarilyintendedforuseinburiedinstallations.NOTEPipingsystemsconformingtothisInternationalStandardcanalsobeusedfornon-buriedapplicationsprovidedtheinfluenceoftheenvironmentandthesupportsareconsideredinthedesignofthepipes,fittingsandjoints.ThisInternationalStandardisapplicabletopipes,fittingsandtheirjointsofnominalsizesfromDN50toDN4000whichareintendedtobeusedfortheconveyanceofwaterattemperaturesupto50℃,withorwithoutpressure.Inapipeworksystem,pipesandfittingsofdifferentnominalpressureandstiffnessratingsmaybeusedtogether.Clause4specifiesthegeneralaspectsofGRP-UPpipingsystemsintendedtobeusedinthefieldofwatersupplywithorwithoutpressure.Clause5specifiesthecharacteristicsofpipesmadefromGRP-UPwithorwithoutaggregatesand/orfillers.Thepipesmayhaveathermoplasticsorthermosettingresinliner.Clause5alsospecifiesthetestparametersforthetestmethodsreferredtointhisInternationalStandard.Clause6specifiesthecharacteristicsoffittingsmadefromGRP-UP,withorwithoutathermoplasticsorthermosettingresinliner,intendedtobeusedinthefieldofwatersupply.Clause6specifiesthedimensionalandperformancerequirementsforbends,branches,reducers,saddlesandflangedadaptors.Clause6isapplicabletofittingsmadeusinganyofthefollowingtechniques:a)fabricationfromstraightpipes;b)mouldingby1)filamentwinding,2)tapewinding,3)contactmoulding,4)hotorcoldcompressionmoulding.
【中国标准分类号】:G31
【国际标准分类号】:23_040_20
【页数】:72P.;A4
【正文语种】:英语