SAE AS4201 Port - Ring Locked Fluid Connection Type, 8000 psi Design Standard

作者:标准资料网 时间:2024-05-17 02:57:19   浏览:8784   来源:标准资料网
下载地址: 点击此处下载
Product Code:SAE AS4201
Title:Port - Ring Locked Fluid Connection Type, 8000 psi Design Standard
Issuing Committee:G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies
Scope:No scope available.
下载地址: 点击此处下载
基本信息
标准名称:汽车发动机镶耐磨圈活塞金相检验
中标分类: 车辆 >> 汽车发动机 >> 机体与运动件
ICS分类: 道路车辆工程 >> 道路车辆内燃机
替代情况:替代QC/T 275-1999
发布部门:中华人民共和国国家发展和改革委员会
发布日期:2008-06-16
实施日期:2008-12-01
首发日期:
作废日期:
提出单位:全国汽车标准化技术委员会
归口单位:全国汽车标准化技术委员会活塞活塞环分委会
起草单位:山东滨州渤海活塞股份有限公司;南平华闽汽车配件工业有限公司
出版社:中国计划出版社
出版日期:2008-12-01
页数:26
书号:1580177.116
适用范围

本标准规定了汽车发动机镶耐磨圈活塞的金相组织级别、检验及评定。
本标准适用于气缸直径为200mm以下的汽车发动机共晶铝硅合金镶圈活塞。

前言

没有内容

目录

没有内容

引用标准

没有内容

所属分类: 车辆 汽车发动机 机体与运动件 道路车辆工程 道路车辆内燃机
Product Code:SAE J1926/3
Title:Connections for General Use and Fluid Power - Ports and Stud Ends with ASME B1.1 Threads and O-Ring Sealing - Part 3: Light-Duty (L Series) Stud Ends
Issuing Committee:Hydraulic Tube Fittings Committee
Scope: This part of SAE J1926 specifies dimensions, performance requirements, and test procedures for adjustable and nonadjustable light-duty (L series) stud ends with ISO 725 threads for use in fluid power and general applications and the O-rings used with them. Stud ends in accordance with this part of SAE J1926 may be used at working pressures up to 40 MPa for nonadjustable stud ends and up to 31.5 MPa for adjustable stud ends. The permissible working pressure depends upon materials, design, working conditions, application, etc. For threaded ports and stud end specified in new designs for hydraulic fluid power applications, only SAE J2244 (ISO 6149) shall be used. Threaded ports and stud ends in accordance with ISO 1179, ISO 9974, and ISO 11926 shall not be used for new design in hydraulic fluid power applications. Conformance to the dimensional information does not guarantee rated performance. Each manufacturer shall perform testing according to the specification contained in this document to ensure that components made to this document comply with the performance rating.